BMST1048LY4R

LY4R – T1048-LY4R – 48*1G 4*10G Management Switch wRails (No Net OS included)

US$3,000.00
In Stock

This product has been added to 3 people'scarts.

In Stock
Categories: ,

Description

The Next Wave Data Center Rack Management Switch

Data center networks face changes with hardware and meeting the requirements of the software it hosts. Quanta Cloud Technology provides a series of Bare Metal Switches, the QuantaMesh BMS product line, that addresses these changes in the data center market. The QuantaMesh BMS product lines support speeds up to 100G speeds on their Ethernet Switches. To meet the requirements of high performance, high availability, fast scale out, low latency performance, and continuous serviceability in data center applications, the QuantaMesh BMS product line is the best choice.

NetworkSwitchQuantaMeshT1048LY4R FrontView01 HS

BMC (Baseboard Management Controller) embedded on the server as the core of the Intelligent Platform Management Interface (IPMI) architecture can now be implemented in the Ethernet switch. In addition to providing health monitoring of the temperature, power status, and cooling fans; BMC also aids in the deployment and management of software and hardware peripherals.

QuantaMesh T1048-LY4R supports 48 10BASE-T/100BASE-TX/1000BASE-T and 4 1/10G SFP+ ports equipped with BMC in a compact rack unit size. T1048-LY4R plays a management role in a server rack with not only Ethernet switch functions but also IPMI 2.0 compliance. With ONIE (Open Network Installation Environment) pre-loaded it can be used with any OS which supports the ONIE installer to achieve agile installation and fast response for today’s IT demands.

NetworkSwitchQuantaMeshT1048LY4R FrontView02 hs

Physical ports
Port configuration48 10/100/1000BASE-T and 4 1/10GbE SFP+ ports
Management PortOut-of-band management port:
1 x RJ-45 (10/100/1000BASE-T)
1 x SFP (1000BASE-X)
Console Port1 (RJ-45)
USBUSB 2.0
Performance
Switching capacity176Gbps
Maximum forwarding rate131Mpps
Major Components
ASICBroadcom StrataXGS Hurricane2
CPUIntel ATOM Processors
Memory4GB DDR3/ECC
Storage8GB Micro SD
CPU
Storage8GB Micro SD
Layer 2 Features
Switching ModeStore-and-Forward
Spanning Tree802.1w
802.1s
Auto Edge
VLANIEEE 802.1Q Tagged Base
Port-Based
QinQ (802.1ad)
802.3x Flow Control (Pause Frames) 
Storm ControlBroadcast
Unknown Multicast
DLF (Unknown Unicast)
IGMP Snoopingv1/v2/v3
v1/v2 Querier
Immediate Leave
Link Aggregation802.3ad with LACP
Static Trunk
Unicast/Multicast Traffic Balance over Trunking Port
LACP Fallback
Link State Tracking 
Port Backup 
Private VLAN 
QoS Features
Scheduling for priority queueWRR, Strict, Hybrid
COS802.1p
IP TOS precedence
DSCP
DiffServ 
iSCSI optimization 
Security Features
Static and dynamic port security (MAC-based) 
802.1x (MD5, MS-CHAPv2)MAC-based
Port-based
Auto VLAN assignment
Guest VLAN
Unauthenticated VLAN
Access Control ListL2/L3/L4
IPv4/IPv6 ACLL3/L4
RADIUS/TACACS+Authentication, Authorization, Accounting
SSH V2.0 
User name and passwordLocal Authentication
Remote Authentication via RADIUS/TACACS+
AAA
Management IP filteringSNMP
Telnet
SSH
IP Source Guard 
Dynamic ARP inspection (DAI) 
DHCP snoopingIPv4
IPv6
Control Plane Policing / CoPP 
Service Prohibit Access 
Role Base Access Control (RBAC) 
Management Features
Industrial standard command-line interface 
CLI filtering 
CLI schedule 
SSH 
Software UpdateTFTP
SCP
SFTP
Configuration download/uploadTFTP
SCP
SFTP
Dual Images 
SNMP v1/v2c/v3 
SNMP inform v2 
RMON1 Groups: 1, 2, 3, 9 
DHCP client 
DHCP relay (VxLAN environment supported) 
Remote PING 
Traceroute 
NTPv4 
LLDP802.1ab
802.MED
Potential error detection
UDLD 
Port mirroringSPAN
RSPAN
sFlow v5 
Email alertingSMTP
Error-Disable Recovery 
SNTP 
IPv6 Management
IPv4/IPv6 Dual Protocol Stack 
ICMPv6 
ICMPv6 Redirect 
IPv6 Neighbor Discovery 
Stateless Autoconfiguration 
Manual Configuration 
DHCPv6 client/relay 
SNMP over IPv6 
SSH over IPv6 
IPv6 DNS Resolver 
IPv6 RADIUS 
IPv6 TACACS+ 
IPv6 Syslog 
IPv6 SNTP 
Automation
Auto installation 
Mechanical
Dimension (HxWxD)43.2x440x394mm
WeightT1048-LY4R 1 + 1 PSU: 6.04kg (NET)
T1048-LY4R Single PSU: 5.57kg (NET)
Environmental Specifications
Operating temperature0~45°C
Operating humidity90% maximum relative humidity
Power
PSU100~240VAC, 50/60Hz, 120W*2 (1+1)
Power consumptionIdle Mode: 62W
Normal Mode: 68W
Safety
SafetyUL, cUL, CB
EMC
EMCCE, FCC, VCCI
RoHS
RoHSReduction of Hazardous Substances (RoHS) 6
Supported Optics and Cables
Supported Optics and Cables1000BASE-T: Cat 5e
DAC cable (SFP+): 0.5m, 1m, 1.5m, 2m, 2.5m, 3m, and 5m
AOC cable (SFP+, 850nm, MMF): 1m, 3m, 7m, 10m, 20m, and 100m
1G optic (SFP, LC, 850nm, MMF): 1000BASE-SR optic
1G optic (SFP, LC, 1310nm, SMF): 1000BASE-LR optic
10G optic (SFP+, LC, 850nm, MMF): 10GBASE-SR optic
10G optic (SFP+, LC, 1310nm, SMF): 10GBASE-LR optic
Ordering Information
Ordering InformationT1048-LY4R (1LY4BZZ0STK) (Front to Back, 1+1 PSU, rail kit included)
T1048-LY4R(1LY4BZZ0STL) (Back to Front, 1+1 PSU, rail kit included)
T1048-LY4R (1LY4BZZ0STM) (Front to Back, single PSU, rail kit included)
T1048-LY4R(1LY4BZZ0STN) (Back to Front, single PSU, rail kit included)
PSU – (1HYQZZZ014D)(F-2-B, AC, 120W)