LY4R – T1048-LY4R – 48*1G 4*10G Management Switch wRails (No Net OS included)
This product has been added to 3 people'scarts.
Description
The Next Wave Data Center Rack Management Switch
Data center networks face changes with hardware and meeting the requirements of the software it hosts. Quanta Cloud Technology provides a series of Bare Metal Switches, the QuantaMesh BMS product line, that addresses these changes in the data center market. The QuantaMesh BMS product lines support speeds up to 100G speeds on their Ethernet Switches. To meet the requirements of high performance, high availability, fast scale out, low latency performance, and continuous serviceability in data center applications, the QuantaMesh BMS product line is the best choice.
BMC (Baseboard Management Controller) embedded on the server as the core of the Intelligent Platform Management Interface (IPMI) architecture can now be implemented in the Ethernet switch. In addition to providing health monitoring of the temperature, power status, and cooling fans; BMC also aids in the deployment and management of software and hardware peripherals.
QuantaMesh T1048-LY4R supports 48 10BASE-T/100BASE-TX/1000BASE-T and 4 1/10G SFP+ ports equipped with BMC in a compact rack unit size. T1048-LY4R plays a management role in a server rack with not only Ethernet switch functions but also IPMI 2.0 compliance. With ONIE (Open Network Installation Environment) pre-loaded it can be used with any OS which supports the ONIE installer to achieve agile installation and fast response for today’s IT demands.
Physical ports | |
Port configuration | 48 10/100/1000BASE-T and 4 1/10GbE SFP+ ports |
Management Port | Out-of-band management port: |
1 x RJ-45 (10/100/1000BASE-T) | |
1 x SFP (1000BASE-X) | |
Console Port | 1 (RJ-45) |
USB | USB 2.0 |
Performance | |
Switching capacity | 176Gbps |
Maximum forwarding rate | 131Mpps |
Major Components | |
ASIC | Broadcom StrataXGS Hurricane2 |
CPU | Intel ATOM Processors |
Memory | 4GB DDR3/ECC |
Storage | 8GB Micro SD |
CPU | |
Storage | 8GB Micro SD |
Layer 2 Features | |
Switching Mode | Store-and-Forward |
Spanning Tree | 802.1w |
802.1s | |
Auto Edge | |
VLAN | IEEE 802.1Q Tagged Base |
Port-Based | |
QinQ (802.1ad) | |
802.3x Flow Control (Pause Frames) | Â |
Storm Control | Broadcast |
Unknown Multicast | |
DLF (Unknown Unicast) | |
IGMP Snooping | v1/v2/v3 |
v1/v2 Querier | |
Immediate Leave | |
Link Aggregation | 802.3ad with LACP |
Static Trunk | |
Unicast/Multicast Traffic Balance over Trunking Port | |
LACP Fallback | |
Link State Tracking | Â |
Port Backup | Â |
Private VLAN | Â |
QoS Features | |
Scheduling for priority queue | WRR, Strict, Hybrid |
COS | 802.1p |
IP TOS precedence | |
DSCP | |
DiffServ | Â |
iSCSI optimization | Â |
Security Features | |
Static and dynamic port security (MAC-based) | Â |
802.1x (MD5, MS-CHAPv2) | MAC-based |
Port-based | |
Auto VLAN assignment | |
Guest VLAN | |
Unauthenticated VLAN | |
Access Control List | L2/L3/L4 |
IPv4/IPv6 ACL | L3/L4 |
RADIUS/TACACS+ | Authentication, Authorization, Accounting |
SSH V2.0 | Â |
User name and password | Local Authentication |
Remote Authentication via RADIUS/TACACS+ | |
AAA | |
Management IP filtering | SNMP |
Telnet | |
SSH | |
IP Source Guard | Â |
Dynamic ARP inspection (DAI) | Â |
DHCP snooping | IPv4 |
IPv6 | |
Control Plane Policing / CoPP | Â |
Service Prohibit Access | Â |
Role Base Access Control (RBAC) | Â |
Management Features | |
Industrial standard command-line interface | Â |
CLI filtering | Â |
CLI schedule | Â |
SSH | Â |
Software Update | TFTP |
SCP | |
SFTP | |
Configuration download/upload | TFTP |
SCP | |
SFTP | |
Dual Images | Â |
SNMP v1/v2c/v3 | Â |
SNMP inform v2 | Â |
RMON1 Groups: 1, 2, 3, 9 | Â |
DHCP client | Â |
DHCP relay (VxLAN environment supported) | Â |
Remote PING | Â |
Traceroute | Â |
NTPv4 | Â |
LLDP | 802.1ab |
802.MED | |
Potential error detection | |
UDLD | Â |
Port mirroring | SPAN |
RSPAN | |
sFlow v5 | Â |
Email alerting | SMTP |
Error-Disable Recovery | Â |
SNTP | Â |
IPv6 Management | |
IPv4/IPv6 Dual Protocol Stack | Â |
ICMPv6 | Â |
ICMPv6 Redirect | Â |
IPv6 Neighbor Discovery | Â |
Stateless Autoconfiguration | Â |
Manual Configuration | Â |
DHCPv6 client/relay | Â |
SNMP over IPv6 | Â |
SSH over IPv6 | Â |
IPv6 DNS Resolver | Â |
IPv6 RADIUS | Â |
IPv6 TACACS+ | Â |
IPv6 Syslog | Â |
IPv6 SNTP | Â |
Automation | |
Auto installation | Â |
Mechanical | |
Dimension (HxWxD) | 43.2x440x394mm |
Weight | T1048-LY4R 1 + 1 PSU: 6.04kg (NET) |
T1048-LY4R Single PSU: 5.57kg (NET) | |
Environmental Specifications | |
Operating temperature | 0~45°C |
Operating humidity | 90% maximum relative humidity |
Power | |
PSU | 100~240VAC, 50/60Hz, 120W*2 (1+1) |
Power consumption | Idle Mode: 62W |
Normal Mode: 68W | |
Safety | |
Safety | UL, cUL, CB |
EMC | |
EMC | CE, FCC, VCCI |
RoHS | |
RoHS | Reduction of Hazardous Substances (RoHS) 6 |
Supported Optics and Cables | |
Supported Optics and Cables | 1000BASE-T: Cat 5e |
DAC cable (SFP+): 0.5m, 1m, 1.5m, 2m, 2.5m, 3m, and 5m | |
AOC cable (SFP+, 850nm, MMF): 1m, 3m, 7m, 10m, 20m, and 100m | |
1G optic (SFP, LC, 850nm, MMF): 1000BASE-SR optic | |
1G optic (SFP, LC, 1310nm, SMF): 1000BASE-LR optic | |
10G optic (SFP+, LC, 850nm, MMF): 10GBASE-SR optic | |
10G optic (SFP+, LC, 1310nm, SMF): 10GBASE-LR optic | |
Ordering Information | |
Ordering Information | T1048-LY4R (1LY4BZZ0STK) (Front to Back, 1+1 PSU, rail kit included) |
T1048-LY4R(1LY4BZZ0STL) (Back to Front, 1+1 PSU, rail kit included) | |
T1048-LY4R (1LY4BZZ0STM) (Front to Back, single PSU, rail kit included) | |
T1048-LY4R(1LY4BZZ0STN) (Back to Front, single PSU, rail kit included) | |
PSU – (1HYQZZZ014D)(F-2-B, AC, 120W) |