[rank_math_breadcrumb]
Previous
Next
HSGP1 | B8251T83E8HR-2T-N
$4,625 USD
- Powered by 5th/4th Gen Intel® Xeon® Scalable processors with up to 350W TDP
- PCIe 5.0 & DDR5 platform ready
- Offers 16x E1.S" NVMe flash or 12x 2.5" NVMe flash drives
- Up to 3x SW accelerators in a 1U chassis
- Supports up to 400GbE networking bandwidth in x16 PCIe 5.0 slots.
- Enhanced serviceability with tool-less, hot-swap designs
- NEBS compliant for Telco/5G data center deployments
- Liquid cooling supported with up to 385W CPU TDP
- Upgraded data protection with Intel SGX, Intel® Crypto Acceleration, and PFR (optional)
Specifications
Specifications
| System | Form Factor | 2U Rackmount |
| Chassis Model | TN83 | |
| Dimension (D x W x H) | 32.71″ x 17.25″ x 3.43″ (831 x 438.4 x 87mm) | |
| Motherboard Name | S8251GM2NE-2T # | |
| Motherboard Notification | # The motherboard not sold separately | |
| Gross Weight | 33.1 kg (73 lbs) | |
| Net weight | 20.3 kg (44.8 lbs) | |
| Front Panel | Buttons | (1) UID / (1) PWR w/ LED / (1) RST |
| LEDs | (1) HDD / (1) UID / (2) LAN / (1) System Event | |
| I/O Ports | (2) USB 3.1 Gen.1 ports | |
| External Drive Bay | Q’ty / Type | (8) 3.5″ Hot-swap HDD/SSDs |
| Front Drive Bay Interface | (8) SATA 6Gb/s / NVMe | |
| Front HDD Backplane Support | SAS 12Gb/s /SATA 6Gb/s /NVMe | |
| Notification | The SAS/SATA HDD backplane is connected to onboard SATA connection by default. Please contact Tyan technical support if a discrete SAS HBA/RAID adapter is required. | |
| System Cooling Configuration | Fan | (5) 8cm fans |
| Power Supply | Type | CRPS |
| Input Range | AC 100-127V/14A / AC 200-240V/12.6A | |
| Frequency | 47-63 Hz | |
| Output Watts | 1,200 Watts (100-127Vac input) / 2,200 Watts (200-240Vac input) | |
| Efficiency | PFC / 80 plus Platinum | |
| Redundancy | 1+1 | |
| Processor | Q’ty / Socket Type | (2) AMD Socket SP3 |
| Supported CPU Series | (2) AMD EPYC™ 7002/7003 (with AMD 3D V-Cache™ Technology) Series Processor | |
| Thermal Design Power Wattage | Max up to 240W* (cTDP) | |
| #Notification | 240W CPUs are supported with certain condition. Please contact Tyan Technical Support before purchasing | |
| Memory | Supported DIMM Qty | (8)+(8) DIMM slots |
| DIMM Type / Speed | DDR4 ECC RDIMM/RDIMM 3DS/LRDIMM/LRDIMM 3DS 3200 | |
| Capacity | Up to 2,048GB RDIMM / 4,096GB LRDIMM 3DS | |
| Memory channel | 8 Channels per CPU | |
| Memory voltage | 1.2V | |
| Expansion Slots | Pre-installed TYAN Riser Card (PCIe Gen.4) | (1) M8251T83-L32-2F riser card for (2) FH/FL PCIe Gen.4 x16 / (1) M8251T83-R32-2F riser card for (2) FH/FL PCIe Gen.4 x16 / (1) M8251T83-LR32-2L riser card for (1) HH/HL PCIe Gen.4 x16 (right) +(1) HH/HL PCIe Gen.4 x16 (left) slots |
| Physical Dimension Abbreviation | FH/FL (Full-height / Full-length): 4.4″ x 12.3″ (111.2 x 312mm) | |
| LAN | Q’ty / Port | (2) 10GbE ports + (1) GbE dedicated for IPMI |
| Controller | Intel X550-AT2 | |
| PHY | Realtek RTL8211E | |
| Storage SATA | Connector | (8) SATA from (2) Slim SAS (8 ports) / (2) SATA-DOM |
| Controller | Direct from AMD EPYC CPU | |
| Speed | 6Gb/s | |
| RAID | N/A | |
| Storage NVMe | Connector (U.2) | (4) SFF-8654 for (8) front NVMe |
| Graphic | Connector type | D-Sub 15-pin |
| Resolution | Up to 1920×1200 | |
| Chipset | Aspeed AST2500 | |
| I/O Ports | USB | (1) USB3.1 Gen.1 port (Type-A) / (2) USB3.1 Gen.1 ports (via Cable) / (2) USB3.1 Gen.1 ports (@ rear) |
| COM | (1) header ( COM1 ) | |
| VGA | (1) D-Sub 15-pin port | |
| RJ-45 | (2) 10 GbE ports + (1) dedicated GbE for IPMI | |
| SATA | (2) SATA-DOM connectors / (8) SATA from (2) Slim SAS connectors | |
| TPM (Optional) | TPM Support | Please refer to our TPM supported list. |
| System Monitoring | Chipset | Aspeed AST2500 |
| Temperature | Monitors temperature for CPU & memory & system environment | |
| Voltage | Monitors voltage for CPU, memory, chipset & power supply | |
| LED | Over temperature warning indicator / Fan & PSU fail LED indicator | |
| Others | Watchdog timer support | |
| Server Management | Onboard Chipset | Onboard Aspeed AST2500 |
| AST2500 iKVM Feature | 24-bit high quality video compression / Supports storage over IP and remote platform-flash / USB 2.0 virtual hub | |
| AST2500 IPMI Feature | IPMI 2.0 compliant baseboard management controller (BMC) / 10/100/1000 Mb/s MAC interface | |
| BIOS | Brand / ROM size | AMI / 32MB |
| Feature | Hardware Monitor / FAN speed control automatic / Boot from USB device/PXE via LAN/Storage / Console Redirection / SMBIOS 3.0/PnP/Wake on LAN / ACPI 6.1 / ACPI sleeping states S0, S5 | |
| Operating Environment | Operating Temp. | 10° C ~ 35° C (50° F~ 95° F) |
| Non-operating Temp. | – 40° C ~ 70° C (-40° F ~ 158° F) | |
| In/Non-operating Humidity | 90%, non-condensing at 35° C | |
| Regulation | FCC (SDoC) | Class A |
| CE (DoC) | Class A | |
| CB/LVD | Yes | |
| RCM | Yes | |
| VCCI | Yes | |
| BSMI | Yes | |
| Operating System | OS supported list | Please refer to our AVL support lists. |
| RoHS | RoHS 6/6 Compliant | Yes |
| Package Contains | Barebone | (1) TN83-B8251 Barebone |
| Manual | (1) Quick Installation Guide |
